“Sidewalkbridges.com” used scaffold in the past to build Sidewalk Bridge. A sidewalk shed is a structure constructed to protect pedestrians from objects falling from a building or construction site. In New York City, a sidewalk shed is required when construction work is over 40 feet high. It specializes in scaffolding and scaffold rental. When working up high, consider scaffolding rental rather than struggling with a ladder. Make sure to comply with the local law 11.The company is situated conveniently in Yonkers.“Sidewalkbridges.com” Scaffold has been providing the New York City constituency with the highest quality scaffolding and Urban Shed service for the past 16 years. Products from sidewalk bridge to scaffolding rentals, as well as toys for big boys for sale. This Scaffold Company customer’s needs are most important and are catering for a wide market by providing toys and tools for the construction industry. This scaffolding company offers a reliable service of scaffold rental to its New York customer. The scaffold company prices all its equipment reasonably. By selling used scaffold, allows the company to access different markets by selling toys and tools to the construction industry. The scaffold company also sells many a ladder within the industry. The scaffolding company has found its niche in the selling and rental of used scaffold, Sidewalk Bridge, sidewalk shed, ladder, and the selling of toys and tools for the construction industry.

Sidewalk Bridge 914-512-7619

Recent incidents involving supported sidewalk bridging and sidewalk bridges NYC have indicated that appropriate caution has not been taken with respect to installation and engineering. This notice is to serve as a reminder for what the City of New York requires regarding the design and construction of all supported sidewalk shed and sidewalk bridges NYC Noncompliance with the regulations below will result in immediate Stop Work Orders, penalties up to $2,000 and criminal court summonses. Failure to comply with a Stop Work Order may result in the imposition of fines up to $10,000.

When a Permit is required: A permit is required prior to erecting a sidewalk shed or supported sidewalk scaffolding over 40 feet in height. If a scaffold is on top of a sidewalk bridges NYC the height of the scaffold must include the height of the shed and be taken from the top of the sidewalk. If the supported scaffold is located on a setback or roof of a building, and if the outer leg of the scaffolds is located a distance less than half the height of the scaffold (from the top of roof or floor slab), the height of the sidewalk sheds for permitting purposes shall include the height of the building below.

NYC Building Code Design Requirements for Temporary Equipment & Constructions:

Temporary equipment and constructions shall be designed so that the allowable stress values prescribed in subchapter 10 are not exceeded.

Provides load combinations which include dead live wind and snow.

Loads subscribed in subchapter 9 must be used for design, including wind Uplift forces from wind must be considered in design calculations

Snow and ice loads must be included in design calculations during winter months

Tieback design must include wind factors created when netting is used, as wind load can be significantly increased with netting and screens

Note: Wind forces are reversible and can impose a suction load away from the structure as well as towards the structure

Minimum factor of safety for overturning and sliding is 1.5.

Free-standing sidewalk bridging and sidewalk bridges NYC
must meet code requirements for overturning and sliding

Design shall be executed by or under the supervision of a licensed engineer or an architect who shall sign and seal the drawings and specifications.

If the scaffolding is supported on a sidewalk shed or roof structure, you must verify that the base structure can support the concentrated loads imposed by the scaffold legs

Supported Scaffold &

Sidewalk bridges NYC
 Requirements

No. 1

Regulatory Notice

Supported Scaffold & Sidewalk Shed Requirements

At points of anchorage, you must check the base building elements for local failure

All scaffold members shall be designed to be capable of withstanding, without collapse, 4 times the maximum loads.

Standard Scaffold Designations and Design Live Loads

a. Light duty scaffold to be used for loads up to 25psf and is intended for use by carpenters, painters and other similar trades.

b. Medium duty sidewalk shed to be used for loads up to 50psf and is intended for use by bricklayers and plasters.

c. Heavy duty scaffolding to be used for loads up to 75psf and is intended for use by stone masons.

Sidewalk sheds for buildings 100ft or more in height shall be designed for a live load of 300psf. For buildings under 100ft in height, the minimum sidewalk design live load is 150 psf and no storage is permitted.

If the BSA approved sidewalk shed design is utilized, you must verify that the shed is within the scope of the design by ensuring that:

Height does not exceed maximum height

Width does not exceed maximum width

Parapet does not exceed the height limit

Details/connections are in full compliance

If scaffolding is sitting on a sidewalk shed, the BSA design does not apply

Sheds must be designed for live loads in addition to imposed loads from the sidewalk shed

Federal Code Design Requirements for Scaffolding:

OSHA Subpart  A large area sidewalk scaffolding (common platform) shall be designed for a minimum of 50psf. Supported Scaffold Submitted Drawing Requirements:

 Scaffolds over 40ft in height require a permit from the Department of Buildings. Submitted drawings for approval must include the following:

Design loads including maximum live load capacity in accordance with Intended use of scaffolding Number of simultaneously planked levels Number of levels to be utilized simultaneously Details for tie-back to the building or structure Maximum spacing of ties both vertically and horizontally Specifications for equipment to be used Make and model of scaffolding frames Type and minimum strengths of timber

If a scaffold is sitting atop a structure, the layout of the legs imposed on the existing structure below. (This is applicable to both buildings and sidewalk sheds.)

NYC Building Code Requirements for Sidewalk Shed Construction:

Sidewalk Sheds must be erected and utilized in accordance with of the NYC Building Code. -provides when a sidewalk shed must be constructed. A shed is required when:

New construction is over 40ft and the distance from the face of the building to the inner edge of the walkway is less than half the height of the new building

The demolished structure is over 25ft and the distance from the face of the building to the inner edge of the walkway is less than half the height of the new building

Material or debris is to be moved over a sidewalk by a crane or hoist

A portion of a facade over 40ft from the sidewalk is being altered or repaired and the distance from the portion of the building being altered or repaired to the inner edge of the walkway is less than half the height of the building.

gives the requirements for the lighting under a sidewalk shed.

A permit for the lighting must be obtained by a licensed electrician

NYC Building Code Supported Scaffold Construction Requirements:

Supported sidewalk shed must be erected and utilized in accordance with Article 8 of Subchapter 19 of the New York City Building Code. Requirements include, but are not limited to: Any supported sidewalk sheds over 40ft in height must have a permit

Any person erecting, maintaining or modifying or dismantling supported sidewalk scaffolding shall have a Certificate of Completion from an approved training course

Any person using support sidewalk sheds shall have a Users Certificate from an approved training course. The footing and anchorage for every sidewalk scaffold shall be sound rigid and secure against movement in any direction Scaffolds must not be loaded in excess of the design loads Loads must not be concentrated on scaffolding so as not to cause overstress

Guardrails must be provided on the open sides and ends of sidewalk bridging

Free-standing sidewalk shed must have a minimum height to minimum base dimension ratio of 4 to 1 Federal Supported Scaffold Construction Requirements:

Supported Sidewalk Bridge must be erected and utilized in accordance with OSHA  Requirements include, but are not limited to Ties must be installed at locations where horizontal members support both inner and outer legs Frames must be joined together vertically by coupling or stacking pins Where uplift can occur, frames must be locked together by pins or equivalent means.